The board carries two independent thermometers and the code averaged them
into temp_raw without ever recording either. Measured over 12 samples on a
real station: HTS221 30.973 C at sd 0.060, LPS25HB 29.810 C at sd 0.443, a
standing gradient of 1.163 C with the SoC at 44.55 C.
Two things follow from that and neither is possible without the raw channels.
A plain average of a quiet sensor and one seven times noisier lands at sd
0.223 where inverse-variance weighting reaches 0.060, and the gradient between
two chips at different distances from the SoC is a second observation of
self-heating that could identify the compensator's k with no reference
thermometer. Both need history, and history cannot be backfilled, so the
columns land on their own ahead of the work that consumes them.
CREATE TABLE IF NOT EXISTS is a no-op against a table that already exists, so
adding to COLUMNS would have reached a fresh install and silently missed every
station already running, then surfaced as an OperationalError inside
insert_telemetry. That sits on the sample loop, so it takes a station down
rather than leaving a gap. Store now reconciles the table against COLUMNS on
open, which makes every future column addition safe rather than just this one.
The simulator gains the same two channels, with couplings solved so their
forward models average to exactly the k = 0.55 the compensator is tuned
against. Aggregate behaviour is unchanged; only the per-channel detail is new.
Simulated temp_raw noise does rise from 0.05 to 0.223, which is not a
regression but the end of an over-optimistic figure: it was modelling the
quiet sensor and calling it the average.
Reported from a real station after 1.5 days: a six hour temperature forecast of
53 C in a 24 C room, and 9 C at one day, both carrying a plus or minus of 0.43.
Confidently wrong is the one failure this project is supposed to refuse.
Root cause. fit() replayed history into the live RLS on every retrain tick and
never reset, so 453 grid rows had produced 64,676 updates in a day and a half.
RLS with forgetting reads every update as fresh evidence, so the model believed
it had a hundred times the data it had: P collapsed, in-sample error looked
excellent, and the weights drifted without bound in directions the data never
excited. Measured: cond(P) 3.1e9 and ||theta|| 1680 against a median |theta| of
1.67. A refit now starts from the prior, which makes retraining idempotent.
Across 25 refits on the real data ||theta|| holds at 11.35, drifting 0.03, where
before it grew without limit.
The two largest weights were sin_doy and cos_doy at +1174 and +1191. Annual
harmonics were in the design matrix from the first sample, where they are
near-constant, near-collinear with each other and with the bias, and a
rank-deficient regressor is what RLS answers with enormous cancelling weights.
They are now held at zero until the record spans the same 120 days the
climatology fit already requires, because a day and a half of data says nothing
whatsoever about the season.
Also raised the standardiser's variance floor from 1e-8, which only caught a
bit-exactly constant column, to 1e-3. A feature that merely barely moves was
being divided by its own noise.
The conformal calibrators and Hedge weights are deliberately not reset by a
refit: those are earned from scored forecasts, not from this regression.
Backtest unchanged within noise, coverage still 89 to 91 across all 18 heads.
Four regression tests added, including that refitting the same history twice
must give the same model.
A room held at a setpoint is a different process from one left to drift. It is
a closed loop, and persistence, the baseline everything here is scored against,
is the wrong statement about it: the truth is not that it stays where it is, it
is that it returns to the setpoint.
So site.heating adds a fourth ensemble member, first order because that is what
a controlled system is:
dT_set(h) = (T_set - T_now) * (1 - exp(-h / tau))
Humidity follows and is the part that is easy to get wrong. Heating adds no
moisture, so vapour pressure is conserved and not relative humidity:
RH(h) = RH_now * es(T_now) / es(T_now + dT_set(h))
Warm the air and RH falls although nothing was dried, which is why a heated
house in winter is dry. The test asserts the dew point is unchanged to 1e-6.
Pressure gets zero: a thermostat cannot move the synoptic field.
Offered, not imposed. Hedge scores this member on realised error like any
other, so a wrong tau or a stale setpoint costs accuracy and gets down-weighted
rather than quietly biasing every forecast. Verified: on history with no
heating the ensemble assigned it weight 0.000. With heating off it returns zero
and is identical to persistence.
Going from three members to four means old saved heads must migrate.
from_dict reinitialises weights and member_mae. I missed member_mae first time
and it did not fail on load, it failed later inside learn() on a broadcast
error, which is a much worse place to find out; the migration test now covers
both and calls learn() to prove it.
Settings tab gains the toggle, setpoint and time constant. Turning heating on
or off is treated as a regime change like a door: discontinuity marker plus a
queued retrain.
recompute replayed the Kalman over stored rows at their own spacing while q
stays tuned for the live 2 s cadence. Q scales with dt^3, so at the 30 s
persist interval the process noise was 3375x too large and the filter tracked
noise instead of smoothing: it wrote indoor temperature rates of +/-20 C/h into
the history. This is the exact trap DESIGN.md section 2 documents for
simulate.py, which does scale q, and I walked into it anyway. Now rescaled per
step, because tiering means the stored cadence is not constant. Mean |rate| on
the real board dropped to 2.73 C/h; what remains above 10 is the filter's
warm-up transient in the first four samples, which is honest.
Readout scene puts the actual numbers between the animations: temperature,
humidity, sea-level pressure and the signed three hour forecast, each in its
channel colour, scrolling. Text is drawn whole-pixel on purpose. Everything
else here is sub-pixel and that is what makes it look good, but splitting a
3 px glyph across two columns halves its peak and smears it illegible. Crisp
beats smooth when the thing has to be read.
site.environment and site.enclosure record where the sensor lives and what has
changed around it, with POST /api/environment to change them at runtime. This
is not cosmetic: closing a door changes how strongly the sensor couples to
outside, which is a regime change in the process the heads are fitting, and at
lambda 0.9985 they carry about 55 hours of memory. Left alone they keep
predicting the old room for two days. Page-Hinkley would notice eventually but
needs matured forecasts to do it, which at the long horizons is the same two
days. So the endpoint marks a discontinuity and queues a retrain.
1. POST /api/recompute re-derives every compensated column from the untouched
raw values, removing the step a calibration otherwise leaves through the
history. Possible because temp_raw, cpu_temp and hum are never overwritten.
Idempotent by construction and tested per row: 0 of 6051 rows change on a
second run. 6069 rows in 0.25 s here, so a few seconds on the Pi.
2. Calibration now emits a 'discontinuity' event alongside the calibration log,
so downstream views can find the boundary without parsing prose.
3. Vendored Tailwind, Chart.js, hammer, the zoom plugin, KaTeX with its 20
woff2 faces, and both Google fonts into ashvale/static, served by the
station. 1.4 MB. Verified with every non-localhost request aborted in the
browser: zero external requests, equations still render, fonts still load.
The dashboard no longer needs internet.
4. 54 pytest cases over the pure numerics: physics closed forms and round
trips, both compensator inverse properties, the Kalman covariance
invariants and NIS consistency, the RLS trace cap under a deliberately
unexcited regressor, conformal coverage, and the Zambretti ordering. Wired
into CI after the seed step so the recompute cases have history. Writing
them caught my own sign error on the conformal update: a hit raises alpha
and narrows the band, which reads backwards until you follow it through.
5. Stats for Nerds gains the condition number of each head's covariance, a
standardised innovation histogram per Kalman filter from a bounded 600
sample ring buffer, and a reliability strip of realised against nominal
coverage. All arithmetic on data already in memory.
6. OutdoorProbe reads a DS18B20 over the kernel 1-Wire driver, no new
dependency. Polled on its own slower cadence because the sensor blocks for
up to 750 ms during conversion, which would eat a third of the 2 s sample
budget. Rejects the 85000 power-on sentinel and out-of-range values, and
reports age so a dead probe cannot masquerade as fresh.
Seven day outlook moves from History to Live, which now runs four rows.
Conditions ahead tightened so the Live column no longer needs a scroller.
Adds HumidityCompensator: an additive RH offset estimated by one-step RLS from
a trusted hygrometer, clamped to +/-35%, persisted, exposed at
POST /api/calibrate/humidity and on the renamed Models and calibration tab.
It also implements the psychrometric term (RH moved from element temperature
onto air temperature via conserved vapour pressure) but leaves it OFF by
default. The thermal argument predicts a hot element reads low; measured
against a reference hygrometer this board read 75.4% where the truth was
50.4%, so it reads HIGH and that correction would push it the wrong way. When
the flag is enabled, simulate.py applies the exact inverse, per the
simulator/compensator trap in DESIGN.md section 2.
Models pane rebuilt: the scorecard is one column per target so all 18 heads
are visible, and no panel on the tab uses an internal scroller. Verified in
Chromium at 1600x900: Live, History and Models all report zero scrollbars,
zero clipping, no page scroll, zero console errors. Backtest is numerically
identical to the previous commit, confirming the humidity work is a no-op
while the flag is off.
kemal