mirror of
https://github.com/lynchaos/ashvale-station.git
synced 2026-09-12 12:47:49 +00:00
kemal
bda42a0468
The board carries two independent thermometers and the code averaged them into temp_raw without ever recording either. Measured over 12 samples on a real station: HTS221 30.973 C at sd 0.060, LPS25HB 29.810 C at sd 0.443, a standing gradient of 1.163 C with the SoC at 44.55 C. Two things follow from that and neither is possible without the raw channels. A plain average of a quiet sensor and one seven times noisier lands at sd 0.223 where inverse-variance weighting reaches 0.060, and the gradient between two chips at different distances from the SoC is a second observation of self-heating that could identify the compensator's k with no reference thermometer. Both need history, and history cannot be backfilled, so the columns land on their own ahead of the work that consumes them. CREATE TABLE IF NOT EXISTS is a no-op against a table that already exists, so adding to COLUMNS would have reached a fresh install and silently missed every station already running, then surfaced as an OperationalError inside insert_telemetry. That sits on the sample loop, so it takes a station down rather than leaving a gap. Store now reconciles the table against COLUMNS on open, which makes every future column addition safe rather than just this one. The simulator gains the same two channels, with couplings solved so their forward models average to exactly the k = 0.55 the compensator is tuned against. Aggregate behaviour is unchanged; only the per-channel detail is new. Simulated temp_raw noise does rise from 0.05 to 0.223, which is not a regression but the end of an over-optimistic figure: it was modelling the quiet sensor and calling it the average.
771 lines
34 KiB
Python
771 lines
34 KiB
Python
# Copyright 2026 Kemal Yaylali
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
|
|
"""The station: everything wired together and running on its own clocks.
|
|
|
|
Four asynchronous loops, deliberately decoupled so a slow one cannot
|
|
starve a fast one:
|
|
|
|
sample (2 s) read hardware, run the Kalman bank, keep live state
|
|
persist (30 s) one row to SQLite
|
|
train (10 min) rebuild the feature grid, update every head, re-fit
|
|
climatology, emit a fresh forecast bundle
|
|
verify (5 min) score forecasts whose validity time has arrived, feed
|
|
the errors to conformal calibration and drift
|
|
detection, write the scorecard
|
|
|
|
The verify loop is the one most projects skip and the one that makes the
|
|
difference. A forecast that is never scored is an opinion; a forecast
|
|
that is scored against persistence is a measurement.
|
|
"""
|
|
|
|
from __future__ import annotations
|
|
|
|
import asyncio
|
|
import json
|
|
import math
|
|
import time
|
|
from pathlib import Path
|
|
from typing import Any, Dict, List, Optional
|
|
|
|
import numpy as np
|
|
|
|
from . import physics
|
|
from .config import Config
|
|
from .estimation import KalmanCV, SignalTracker
|
|
from .features import build_features
|
|
from .models.anomaly import AnomalyMonitor
|
|
from .models.climatology import HarmonicClimatology
|
|
from .models.nowcast import NowcastEnsemble
|
|
from .models.precip import PrecipitationModel, proxy_wet_label, zambretti
|
|
from .sensors import OutdoorProbe, SenseBoard, enrich
|
|
from .storage import Store, resample
|
|
|
|
STATE_VERSION = 1
|
|
|
|
|
|
class Station:
|
|
def __init__(self, cfg: Config):
|
|
self.cfg = cfg
|
|
self.store = Store(cfg.storage.db_path)
|
|
self.board = SenseBoard(
|
|
rotation=cfg.sensor.rotation_deg,
|
|
low_light=cfg.sensor.low_light,
|
|
tcs_addr=cfg.sensor.tcs3400_addr,
|
|
latitude=cfg.site.latitude,
|
|
longitude=cfg.site.longitude,
|
|
)
|
|
# Optional and entirely absent on a board without one wired up.
|
|
self.probe = (OutdoorProbe(cfg.sensor.outdoor_probe_period_s)
|
|
if cfg.sensor.outdoor_probe else None)
|
|
self.tracker = SignalTracker(cfg)
|
|
self.nowcast = NowcastEnsemble(cfg.model.targets, cfg.model.horizons_s, cfg.model)
|
|
self.climatology = HarmonicClimatology(
|
|
cfg.model.targets, min_days_annual=cfg.model.climatology_min_days_annual
|
|
)
|
|
self.precip = PrecipitationModel()
|
|
self.monitor = AnomalyMonitor(cfg.model)
|
|
|
|
self.live: Dict[str, Any] = {}
|
|
self.forecast_bundle: Dict[str, Any] = {}
|
|
self.outlook_bundle: Dict[str, Any] = {}
|
|
self.precip_bundle: Dict[str, Any] = {}
|
|
self.anomaly_bundle: Dict[str, Any] = {}
|
|
self.last_train: float = 0.0
|
|
self.last_persist: float = 0.0
|
|
self.last_compact: float = 0.0
|
|
self.training_log: List[Dict] = []
|
|
self._tasks: List[asyncio.Task] = []
|
|
self._stop = asyncio.Event()
|
|
|
|
self.state_path = Path(cfg.storage.state_dir) / "station_state.json"
|
|
self.load_state()
|
|
|
|
# ------------------------------------------------------------ state
|
|
|
|
def save_state(self) -> None:
|
|
payload = {
|
|
"version": STATE_VERSION,
|
|
"saved_at": time.time(),
|
|
"tracker": self.tracker.to_dict(),
|
|
"nowcast": self.nowcast.to_dict(),
|
|
"climatology": self.climatology.to_dict(),
|
|
"precip": self.precip.to_dict(),
|
|
"monitor": self.monitor.to_dict(),
|
|
}
|
|
tmp = self.state_path.with_suffix(".tmp")
|
|
with open(tmp, "w", encoding="utf-8") as fh:
|
|
json.dump(payload, fh)
|
|
tmp.replace(self.state_path) # atomic, survives a power cut mid-write
|
|
|
|
def load_state(self) -> bool:
|
|
if not self.state_path.exists():
|
|
return False
|
|
try:
|
|
with open(self.state_path, "r", encoding="utf-8") as fh:
|
|
s = json.load(fh)
|
|
if s.get("version") != STATE_VERSION:
|
|
return False
|
|
self.tracker.load_dict(s["tracker"])
|
|
self.nowcast.load_dict(s["nowcast"])
|
|
self.climatology.load_dict(s["climatology"])
|
|
self.precip.load_dict(s["precip"])
|
|
self.monitor.load_dict(s["monitor"])
|
|
return True
|
|
except Exception as exc:
|
|
self.store.log_event("state", "warn", f"could not restore state: {exc}")
|
|
return False
|
|
|
|
# ----------------------------------------------------------- sample
|
|
|
|
def sample_once(self) -> Dict[str, Any]:
|
|
ts = time.time()
|
|
raw = self.board.read()
|
|
raw = enrich(raw, self.cfg.site.altitude_m)
|
|
est = self.tracker.step(ts, raw.get("temp_raw", float("nan")),
|
|
raw.get("hum", float("nan")),
|
|
raw.get("press", float("nan")),
|
|
raw.get("cpu_temp", float("nan")))
|
|
|
|
temp_c = est["temp_smooth"]
|
|
slp = float(physics.sea_level_pressure(est["press_smooth"], temp_c,
|
|
self.cfg.site.altitude_m))
|
|
dew = float(physics.dew_point(temp_c, est["hum_smooth"]))
|
|
elev, azim = physics.solar_position(ts, self.cfg.site.latitude,
|
|
self.cfg.site.longitude)
|
|
expected = float(physics.clear_sky_irradiance(elev))
|
|
lux = float(raw.get("lux", 0.0) or 0.0)
|
|
cloud = (float(np.clip(1.0 - lux / max(expected * 45.0, 1.0), 0.0, 1.0))
|
|
if elev > 5.0 else 0.5)
|
|
|
|
row = {
|
|
"ts": ts,
|
|
"temp_raw": raw.get("temp_raw"),
|
|
"temp_h": raw.get("temp_h"),
|
|
"temp_p": raw.get("temp_p"),
|
|
"temp_c": est["temp_c"],
|
|
"temp_smooth": temp_c,
|
|
"temp_rate": est["temp_rate"],
|
|
"hum": raw.get("hum"),
|
|
"hum_smooth": est["hum_smooth"],
|
|
"press": raw.get("press"),
|
|
"press_slp": slp,
|
|
"press_smooth": est["press_smooth"],
|
|
"press_rate": est["press_rate"],
|
|
"cpu_temp": raw.get("cpu_temp"),
|
|
"dew_c": dew,
|
|
"lux": lux,
|
|
"r": raw.get("r"), "g": raw.get("g"), "b": raw.get("b"),
|
|
"pitch": raw.get("pitch"), "roll": raw.get("roll"),
|
|
"yaw": raw.get("yaw"), "compass": raw.get("compass"),
|
|
"ax": raw.get("ax"), "ay": raw.get("ay"), "az": raw.get("az"),
|
|
"gx": raw.get("gx"), "gy": raw.get("gy"), "gz": raw.get("gz"),
|
|
}
|
|
|
|
anomaly = self.monitor.observe(ts, {
|
|
"temp_c": temp_c, "hum": est["hum_smooth"], "press_slp": slp,
|
|
"temp_rate": est["temp_rate"], "press_rate": est["press_rate"],
|
|
"dew_c": dew, "cpu_temp": raw.get("cpu_temp"),
|
|
})
|
|
self.anomaly_bundle = anomaly
|
|
|
|
self.live = {
|
|
**row,
|
|
"timestamp": time.strftime("%H:%M:%S", time.localtime(ts)),
|
|
"colour": raw.get("colour", {}),
|
|
"simulated": bool(raw.get("simulated", not self.board.available)),
|
|
"dew_depression": temp_c - dew,
|
|
"vpd": float(physics.vapour_pressure_deficit(temp_c, est["hum_smooth"])),
|
|
"wet_bulb": float(physics.wet_bulb(temp_c, est["hum_smooth"])),
|
|
"heat_index": float(physics.heat_index(temp_c, est["hum_smooth"])),
|
|
"abs_humidity": float(physics.absolute_humidity(temp_c, est["hum_smooth"])),
|
|
"solar_elevation": float(elev),
|
|
"solar_azimuth": float(azim),
|
|
"clear_sky_wm2": expected,
|
|
"cloud_index": cloud,
|
|
"cpu_offset": (raw.get("cpu_temp") or float("nan")) - (raw.get("temp_raw") or float("nan")),
|
|
"compensator_k": self.tracker.compensator.k,
|
|
"hum_offset": self.tracker.hum_compensator.offset,
|
|
"outdoor_c": (self.probe.read() if self.probe is not None else None),
|
|
"hum_psychrometric": float(est["hum_c"]) - float(raw.get("hum") or float("nan")),
|
|
"health": anomaly["health_overall"],
|
|
"novelty_d2": anomaly["novelty"].get("d2", 0.0),
|
|
}
|
|
self._update_precip()
|
|
return self.live
|
|
|
|
def _observation_vector(self) -> Dict[str, float]:
|
|
live = self.live
|
|
hist = self.store.window(8.0, ["ts", "press_slp", "temp_c", "dew_c"])
|
|
tend = {"tend_1h": live.get("press_rate", 0.0),
|
|
"tend_3h": live.get("press_rate", 0.0),
|
|
"tend_6h": live.get("press_rate", 0.0)}
|
|
if hist["ts"].size > 5:
|
|
now = hist["ts"][-1]
|
|
for key, hours in (("tend_1h", 1.0), ("tend_3h", 3.0), ("tend_6h", 6.0)):
|
|
idx = np.searchsorted(hist["ts"], now - hours * 3600.0)
|
|
if 0 <= idx < hist["ts"].size - 1:
|
|
dtp = (now - hist["ts"][idx]) / 3600.0
|
|
if dtp > 0.25:
|
|
tend[key] = float((hist["press_slp"][-1] - hist["press_slp"][idx]) / dtp)
|
|
dew_dep = live.get("dew_depression", 5.0)
|
|
dew_dep_rate = 0.0
|
|
if hist["ts"].size > 5:
|
|
idx = np.searchsorted(hist["ts"], hist["ts"][-1] - 3600.0)
|
|
if 0 <= idx < hist["ts"].size - 1:
|
|
past = hist["temp_c"][idx] - hist["dew_c"][idx]
|
|
dew_dep_rate = float(dew_dep - past)
|
|
return {
|
|
"slp": live.get("press_slp", 1013.25),
|
|
"rh": live.get("hum_smooth", 60.0),
|
|
"dew_depression": dew_dep,
|
|
"dew_dep_rate": dew_dep_rate,
|
|
"cloud_index": live.get("cloud_index", 0.5),
|
|
"temp_dev": self.climatology.anomaly_now(
|
|
"temperature", live.get("ts", time.time()), live.get("temp_smooth", 0.0)
|
|
),
|
|
"wet_bulb_depression": live.get("temp_smooth", 0.0) - live.get("wet_bulb", 0.0),
|
|
**tend,
|
|
}
|
|
|
|
def _update_precip(self) -> None:
|
|
obs = self._observation_vector()
|
|
zam = zambretti(obs["slp"], obs["tend_3h"], self.live.get("ts"),
|
|
self.cfg.site.latitude)
|
|
self.precip_bundle = self.precip.predict(obs, zam)
|
|
self.precip_bundle["indoors_caveat"] = self.cfg.site.indoors
|
|
|
|
y = proxy_wet_label(obs["rh"], obs["dew_depression"], obs["cloud_index"])
|
|
if y is not None and int(self.live.get("ts", 0)) % 300 < self.cfg.sensor.sample_period_s:
|
|
self.precip.learn(obs, zam, y, strong=False)
|
|
|
|
def add_label(self, kind: str, value: float, ts: Optional[float] = None,
|
|
note: str = "") -> Dict:
|
|
"""Human-in-the-loop ground truth. Worth ten times a proxy label."""
|
|
ts = ts or time.time()
|
|
self.store.insert_label(ts, kind, value, note)
|
|
if kind == "rain":
|
|
obs = self._observation_vector()
|
|
zam = zambretti(obs["slp"], obs["tend_3h"], ts, self.cfg.site.latitude)
|
|
loss = self.precip.learn(obs, zam, float(value), strong=True)
|
|
self.store.log_event("label", "info",
|
|
f"strong rain label {value} accepted, loss {loss:.3f}", ts)
|
|
return {"accepted": True, "loss": loss, "strong_labels": self.precip.n_strong}
|
|
return {"accepted": True}
|
|
|
|
def calibrate_temperature(self, reference_c: float) -> Dict:
|
|
raw = self.live.get("temp_raw")
|
|
cpu = self.live.get("cpu_temp")
|
|
if raw is None or cpu is None:
|
|
return {"error": "no live reading yet"}
|
|
result = self.tracker.compensator.calibrate(float(raw), float(cpu), float(reference_c))
|
|
self.store.log_event("calibration", "info",
|
|
f"k -> {result['k']:.3f} (residual {result['residual']:+.2f} C)")
|
|
# Discontinuity marker: everything logged before this instant used a
|
|
# different coefficient. Kept as its own event kind so the scorecard and
|
|
# the records view can find it without parsing prose.
|
|
self.store.log_event("discontinuity", "warn",
|
|
f"temperature k {result['k']:.4f}")
|
|
return result
|
|
|
|
def calibrate_humidity(self, reference_pct: float) -> Dict:
|
|
raw_h = self.live.get("hum")
|
|
raw_t = self.live.get("temp_raw")
|
|
temp_c = self.live.get("temp_c")
|
|
if raw_h is None or raw_t is None or temp_c is None:
|
|
return {"error": "no live reading yet"}
|
|
result = self.tracker.hum_compensator.calibrate(
|
|
float(raw_h), float(raw_t), float(temp_c), float(reference_pct))
|
|
self.save_state()
|
|
self.store.log_event("calibration", "info",
|
|
f"rh offset -> {result['offset']:+.2f}% "
|
|
f"(residual {result['residual']:+.2f}%)")
|
|
self.store.log_event("discontinuity", "warn",
|
|
f"humidity offset {result['offset']:+.4f}")
|
|
return result
|
|
|
|
def reset_humidity_calibration(self) -> Dict:
|
|
from .estimation import HumidityCompensator
|
|
self.tracker.hum_compensator = HumidityCompensator(
|
|
self.cfg.sensor.hum_offset, self.cfg.sensor.hum_offset_min,
|
|
self.cfg.sensor.hum_offset_max,
|
|
psychrometric=self.cfg.sensor.hum_psychrometric,
|
|
)
|
|
self.save_state()
|
|
self.store.log_event("calibration", "info",
|
|
f"rh offset reset to prior {self.cfg.sensor.hum_offset}")
|
|
return {"offset": self.tracker.hum_compensator.offset, "reset": True, "n": 0}
|
|
|
|
def recompute_history(self) -> Dict:
|
|
"""Re-derive every compensated column from the stored raw values.
|
|
|
|
Why this exists: calibration only changes readings from that moment on,
|
|
so a correction of any size leaves a step in the record. Measured on this
|
|
station, one humidity calibration put a 25-point discontinuity through
|
|
the middle of the day. That contaminates the all-time records with values
|
|
that were never real weather, and makes the learners train across a jump.
|
|
|
|
It is possible at all because the raw columns are never overwritten:
|
|
`temp_raw`, `cpu_temp` and `hum` are exactly what the sensor reported, so
|
|
the current coefficients can be applied to the whole history.
|
|
|
|
The Kalman levels are re-run rather than shifted, because the filter is
|
|
not a constant offset. That means the smoothing is *re-derived*, not bit
|
|
identical to what was logged live: the replay sees the stored cadence,
|
|
which for tiered rows is coarser than the 2 s the filter runs at. The
|
|
levels are right, the fine texture of old raw rows is not recoverable.
|
|
"""
|
|
data = self.store.all_for_recompute()
|
|
ts = data["ts"]
|
|
if ts.size == 0:
|
|
return {"rows": 0, "reason": "no history"}
|
|
|
|
t0 = time.time()
|
|
comp, hcomp = self.tracker.compensator, self.tracker.hum_compensator
|
|
n = ts.size
|
|
temp_c = np.empty(n)
|
|
hum_c = np.empty(n)
|
|
for i in range(n):
|
|
tr, cp, hu = data["temp_raw"][i], data["cpu_temp"][i], data["hum"][i]
|
|
temp_c[i] = comp.compensate(tr, cp) if np.isfinite(tr) and np.isfinite(cp) else tr
|
|
hum_c[i] = (hcomp.compensate(hu, tr, temp_c[i])
|
|
if np.isfinite(hu) and np.isfinite(tr) else hu)
|
|
|
|
# Replay the filters over the corrected series. Fresh instances, so an
|
|
# old contaminated state cannot leak into the re-derivation.
|
|
kt = KalmanCV(self.cfg.sensor.kalman_q_temp, self.cfg.sensor.kalman_r_temp)
|
|
kh = KalmanCV(self.cfg.sensor.kalman_q_hum, self.cfg.sensor.kalman_r_hum)
|
|
q_temp = float(self.cfg.sensor.kalman_q_temp)
|
|
q_hum = float(self.cfg.sensor.kalman_q_hum)
|
|
live_dt = float(self.cfg.sensor.sample_period_s)
|
|
temp_s = np.empty(n)
|
|
temp_r = np.empty(n)
|
|
hum_s = np.empty(n)
|
|
prev = None
|
|
for i in range(n):
|
|
dt = live_dt if prev is None else max(ts[i] - prev, 1e-3)
|
|
prev = ts[i]
|
|
# q is tuned for the live 2 s cadence and Q scales with dt^3, so
|
|
# replaying stored rows at their own spacing (30 s raw, 300 s and
|
|
# 3600 s once tiered) inflates the process noise by up to seven
|
|
# orders of magnitude. The filter then abandons smoothing and tracks
|
|
# measurement noise, which showed up as indoor rates of +/-20 C/h.
|
|
# Rescaled per step because tiers mean the cadence is not constant.
|
|
scale = (live_dt / dt) ** 3
|
|
kt.q = q_temp * scale
|
|
kh.q = q_hum * scale
|
|
lvl, rate = kt.update(temp_c[i], dt)
|
|
temp_s[i], temp_r[i] = lvl, rate * 3600.0
|
|
hum_s[i], _ = kh.update(hum_c[i], dt)
|
|
|
|
dew = np.asarray(physics.dew_point(temp_s, hum_s), dtype=float)
|
|
slp = np.asarray(physics.sea_level_pressure(
|
|
data["press"], temp_s, self.cfg.site.altitude_m), dtype=float)
|
|
|
|
written = self.store.apply_recompute(ts, {
|
|
"temp_c": temp_c, "temp_smooth": temp_s, "temp_rate": temp_r,
|
|
"hum_smooth": hum_s, "dew_c": dew, "press_slp": slp,
|
|
})
|
|
secs = time.time() - t0
|
|
self.store.log_event(
|
|
"recompute", "info",
|
|
f"re-derived {written} rows from raw with k={comp.k:.4f}, "
|
|
f"rh offset={hcomp.offset:+.2f}% in {secs:.1f}s")
|
|
return {"rows": written, "seconds": round(secs, 2),
|
|
"k": comp.k, "hum_offset": hcomp.offset}
|
|
|
|
def _setpoint_delta(self, target: str, horizon_s: int, anchor: float) -> float:
|
|
"""Where a thermostatted room is heading, as a delta from now.
|
|
|
|
A controlled room is first order: the heating closes the gap to the
|
|
setpoint exponentially, so after time h the remaining error is
|
|
exp(-h/tau) of what it was. The expected change is therefore
|
|
|
|
dT(h) = (T_set - T_now) * (1 - exp(-h / tau))
|
|
|
|
which is zero at h=0 and asymptotes to the full correction. That is a
|
|
much better statement about a heated room than persistence, which claims
|
|
the room stays wherever it happens to be.
|
|
|
|
Humidity follows for free and is the part people get wrong. Heating adds
|
|
no moisture, so vapour pressure is what is conserved, not relative
|
|
humidity. Warm the air and RH falls even though nothing was dried:
|
|
|
|
RH(h) = RH_now * es(T_now) / es(T_now + dT(h))
|
|
|
|
This is why a heated house in winter is dry. Pressure is unaffected: a
|
|
thermostat cannot move the synoptic field, so that member stays at zero
|
|
and the ensemble will correctly ignore it.
|
|
|
|
Returns 0.0 when heating is off, which makes this member identical to
|
|
persistence and therefore harmless.
|
|
"""
|
|
site = self.cfg.site
|
|
if not site.heating:
|
|
return 0.0
|
|
tau_s = max(float(site.thermal_time_constant_h), 0.05) * 3600.0
|
|
closed = 1.0 - math.exp(-float(horizon_s) / tau_s)
|
|
|
|
temp_now = self.live.get("temp_smooth")
|
|
if temp_now is None:
|
|
return 0.0
|
|
d_temp = (float(site.heating_setpoint_c) - float(temp_now)) * closed
|
|
|
|
if target == "temperature":
|
|
return d_temp
|
|
if target == "humidity":
|
|
# Constant vapour pressure, so RH moves only because es(T) moved.
|
|
es_now = float(physics.saturation_vapour_pressure(temp_now))
|
|
es_fut = float(physics.saturation_vapour_pressure(temp_now + d_temp))
|
|
if es_fut <= 1e-9:
|
|
return 0.0
|
|
rh_now = float(anchor)
|
|
return float(np.clip(rh_now * es_now / es_fut, 0.0, 100.0)) - rh_now
|
|
return 0.0
|
|
|
|
def set_environment(self, environment: Optional[str] = None,
|
|
enclosure: Optional[str] = None,
|
|
note: str = "") -> Dict:
|
|
"""Record a change in the sensor's surroundings and act on it.
|
|
|
|
Not cosmetic. A door closing changes how strongly the sensor couples to
|
|
outside, which is a regime change in the very process the heads are
|
|
fitting. Their forgetting factor is 0.9985 on a five minute grid, about
|
|
55 hours of memory, so left alone they keep predicting the old room for
|
|
two days. Page-Hinkley would eventually notice from forecast error, but
|
|
it needs matured forecasts to do it, which at the longer horizons is
|
|
exactly the two days you were trying to skip.
|
|
|
|
So this does three things: writes a discontinuity marker so the record
|
|
shows where the regime changed, requests a retrain so the fit is redone
|
|
against recent data rather than drifting, and stores the new state for
|
|
the API and the Methods page to report honestly.
|
|
"""
|
|
changed = []
|
|
if environment and environment != self.cfg.site.environment:
|
|
changed.append(f"environment {self.cfg.site.environment} -> {environment}")
|
|
self.cfg.site.environment = environment
|
|
if enclosure and enclosure != self.cfg.site.enclosure:
|
|
changed.append(f"enclosure {self.cfg.site.enclosure} -> {enclosure}")
|
|
self.cfg.site.enclosure = enclosure
|
|
if not changed:
|
|
return {"changed": False, "environment": self.cfg.site.environment,
|
|
"enclosure": self.cfg.site.enclosure}
|
|
|
|
detail = "; ".join(changed) + (f" ({note})" if note else "")
|
|
self.store.log_event("environment", "info", detail)
|
|
self.store.log_event("discontinuity", "warn", detail)
|
|
self.monitor.retrain_requested = True
|
|
return {"changed": True, "environment": self.cfg.site.environment,
|
|
"enclosure": self.cfg.site.enclosure,
|
|
"retrain_requested": True, "detail": detail}
|
|
|
|
def reset_calibration(self) -> Dict:
|
|
"""Return the self-heating coefficient to its configured prior.
|
|
|
|
Worth having: a single mistyped reference reading can drive `k`
|
|
to its clamp, and because state persists across restarts it will
|
|
stay there quietly biasing every reading until you notice.
|
|
"""
|
|
from .estimation import ThermalCompensator
|
|
self.tracker.compensator = ThermalCompensator(
|
|
self.cfg.sensor.cpu_heat_k, self.cfg.sensor.cpu_heat_k_min,
|
|
self.cfg.sensor.cpu_heat_k_max,
|
|
)
|
|
self.save_state()
|
|
self.store.log_event("calibration", "info",
|
|
f"coefficient reset to prior k={self.cfg.sensor.cpu_heat_k}")
|
|
return {"k": self.tracker.compensator.k, "reset": True, "n": 0}
|
|
|
|
# ------------------------------------------------------------ train
|
|
|
|
def build_training_grid(self, hours: float = 24 * 30):
|
|
raw = self.store.window(hours, ["ts", "temp_smooth", "hum_smooth",
|
|
"press_slp", "lux"])
|
|
if raw["ts"].size < 10:
|
|
return None
|
|
grid_ts, cols = resample(
|
|
raw["ts"],
|
|
{"temperature": raw["temp_smooth"], "humidity": raw["hum_smooth"],
|
|
"pressure": raw["press_slp"], "lux": raw["lux"]},
|
|
self.cfg.model.grid_s,
|
|
)
|
|
if grid_ts.size < self.cfg.model.min_rows_to_train:
|
|
return None
|
|
X, valid = build_features(
|
|
grid_ts, cols["temperature"], cols["humidity"], cols["pressure"],
|
|
cols["lux"], self.cfg.model.grid_s,
|
|
self.cfg.site.latitude, self.cfg.site.longitude,
|
|
self.cfg.model.climatology_min_days_annual,
|
|
)
|
|
return grid_ts, cols, X, valid
|
|
|
|
def train(self, hours: float = 24 * 30) -> Dict:
|
|
t_start = time.time()
|
|
built = self.build_training_grid(hours)
|
|
if built is None:
|
|
return {"trained": False,
|
|
"reason": f"need at least {self.cfg.model.min_rows_to_train} grid rows"}
|
|
grid_ts, cols, X, valid = built
|
|
|
|
clim_scores = self.climatology.fit(grid_ts, cols, valid)
|
|
counts = self.nowcast.fit(X, valid, cols, self.climatology, grid_ts,
|
|
setpoint_fn=self._setpoint_delta)
|
|
|
|
self.last_train = time.time()
|
|
self.monitor.clear_retrain_flag()
|
|
entry = {
|
|
"ts": self.last_train,
|
|
"grid_rows": int(grid_ts.size),
|
|
"valid_rows": int(valid.sum()),
|
|
"span_days": round(float((grid_ts[-1] - grid_ts[0]) / 86400.0), 2),
|
|
"pairs": counts,
|
|
"climatology_resid_std": {k: round(v, 3) for k, v in clim_scores.items()},
|
|
"annual_terms": self.climatology.use_annual,
|
|
"seconds": round(time.time() - t_start, 2),
|
|
}
|
|
self.training_log = ([entry] + self.training_log)[:20]
|
|
self.store.log_event("train", "info",
|
|
f"retrained on {grid_ts.size} grid rows in {entry['seconds']}s")
|
|
self.refresh_forecasts()
|
|
self.save_state()
|
|
return {"trained": True, **entry}
|
|
|
|
# --------------------------------------------------------- forecast
|
|
|
|
def refresh_forecasts(self, persist: bool = True) -> Dict:
|
|
built = self.build_training_grid(hours=48.0)
|
|
now = time.time()
|
|
if built is None or not self.live:
|
|
return {}
|
|
grid_ts, cols, X, valid = built
|
|
x_now = X[-1]
|
|
|
|
anchors = {
|
|
"temperature": float(self.live.get("temp_smooth", cols["temperature"][-1])),
|
|
"humidity": float(self.live.get("hum_smooth", cols["humidity"][-1])),
|
|
"pressure": float(self.live.get("press_slp", cols["pressure"][-1])),
|
|
}
|
|
fc = self.nowcast.forecast(x_now, anchors, now, self.climatology, setpoint_fn=self._setpoint_delta)
|
|
|
|
bundle: Dict[str, Any] = {"issued_ts": now, "anchors": anchors, "targets": {}}
|
|
for target, per_h in fc.items():
|
|
series = []
|
|
for h in sorted(per_h):
|
|
p = per_h[h]
|
|
series.append({
|
|
"horizon_s": h,
|
|
"horizon_label": _fmt_horizon(h),
|
|
"valid_ts": now + h,
|
|
"mu": round(p["mu"], 3),
|
|
"lo": round(p["lo"], 3),
|
|
"hi": round(p["hi"], 3),
|
|
"delta": round(p["delta"], 3),
|
|
"weights": {k: round(v, 3) for k, v in p["weights"].items()},
|
|
})
|
|
if persist:
|
|
self.store.insert_forecast(now, h, target, p["mu"], p["lo"],
|
|
p["hi"], "ensemble")
|
|
bundle["targets"][target] = series
|
|
self.forecast_bundle = bundle
|
|
|
|
self.outlook_bundle = {
|
|
"issued_ts": now,
|
|
"ready": self.climatology.ready,
|
|
"annual_terms": self.climatology.use_annual,
|
|
"history_days": round(self.store.span_days(), 2),
|
|
"targets": {
|
|
t: self.climatology.outlook(
|
|
t, now, days=7,
|
|
anomaly=self.climatology.anomaly_now(t, now, anchors.get(t, 0.0)),
|
|
)
|
|
for t in self.cfg.model.targets
|
|
},
|
|
}
|
|
return bundle
|
|
|
|
# ----------------------------------------------------------- verify
|
|
|
|
def verify(self) -> Dict:
|
|
"""Score matured forecasts against truth and against persistence."""
|
|
due = self.store.due_forecasts()
|
|
if not due:
|
|
return {"scored": 0}
|
|
|
|
hist = self.store.window(24 * 8, ["ts", "temp_smooth", "hum_smooth", "press_slp"])
|
|
if hist["ts"].size < 5:
|
|
return {"scored": 0}
|
|
series = {"temperature": hist["temp_smooth"], "humidity": hist["hum_smooth"],
|
|
"pressure": hist["press_slp"]}
|
|
|
|
def value_at(target: str, ts: float) -> Optional[float]:
|
|
idx = int(np.searchsorted(hist["ts"], ts))
|
|
if idx <= 0 or idx >= hist["ts"].size:
|
|
return None
|
|
if abs(hist["ts"][idx] - ts) > 900:
|
|
return None
|
|
return float(series[target][idx])
|
|
|
|
buckets: Dict[tuple, Dict[str, List[float]]] = {}
|
|
scored = 0
|
|
for row in due:
|
|
target, h = row["target"], int(row["horizon_s"])
|
|
truth = value_at(target, row["valid_ts"])
|
|
anchor = value_at(target, row["issued_ts"])
|
|
if truth is None or anchor is None:
|
|
continue
|
|
key = (target, h)
|
|
b = buckets.setdefault(key, {"err": [], "pers": [], "cov": []})
|
|
err = truth - row["mu"]
|
|
b["err"].append(err)
|
|
b["pers"].append(truth - anchor)
|
|
b["cov"].append(1.0 if row["lo"] <= truth <= row["hi"] else 0.0)
|
|
head = self.nowcast.heads.get(key)
|
|
if head is not None:
|
|
head.conformal.observe(err, covered=bool(row["lo"] <= truth <= row["hi"]))
|
|
if h <= 10800:
|
|
self.monitor.observe_error(row["valid_ts"], abs(err))
|
|
scored += 1
|
|
|
|
now = time.time()
|
|
for (target, h), b in buckets.items():
|
|
e = np.asarray(b["err"], dtype=float)
|
|
p = np.asarray(b["pers"], dtype=float)
|
|
mae = float(np.mean(np.abs(e)))
|
|
mae_p = float(np.mean(np.abs(p)))
|
|
self.store.insert_score(
|
|
now, target, h,
|
|
mae=mae,
|
|
rmse=float(np.sqrt(np.mean(e ** 2))),
|
|
bias=float(np.mean(e)),
|
|
mae_persistence=mae_p,
|
|
skill=float(1.0 - mae / mae_p) if mae_p > 1e-9 else 0.0,
|
|
coverage=float(np.mean(b["cov"])),
|
|
n=int(e.size),
|
|
)
|
|
|
|
with self.store._conn() as conn:
|
|
conn.execute("DELETE FROM forecasts WHERE valid_ts <= ?", (now - 3600,))
|
|
return {"scored": scored, "buckets": len(buckets)}
|
|
|
|
# ------------------------------------------------------------ loops
|
|
|
|
async def _loop_sample(self):
|
|
period = self.cfg.sensor.sample_period_s
|
|
while not self._stop.is_set():
|
|
try:
|
|
self.sample_once()
|
|
now = time.time()
|
|
if now - self.last_persist >= self.cfg.sensor.persist_period_s:
|
|
self.store.insert_telemetry(self.live)
|
|
self.last_persist = now
|
|
except Exception as exc:
|
|
self.store.log_event("sample", "error", repr(exc))
|
|
await asyncio.sleep(period)
|
|
|
|
async def _loop_train(self):
|
|
await asyncio.sleep(5)
|
|
try:
|
|
self.train()
|
|
except Exception as exc:
|
|
self.store.log_event("train", "error", repr(exc))
|
|
while not self._stop.is_set():
|
|
await asyncio.sleep(30)
|
|
now = time.time()
|
|
due = (now - self.last_train) >= self.cfg.model.train_period_s
|
|
if due or self.monitor.retrain_requested:
|
|
try:
|
|
await asyncio.to_thread(self.train)
|
|
except Exception as exc:
|
|
self.store.log_event("train", "error", repr(exc))
|
|
|
|
async def _loop_verify(self):
|
|
await asyncio.sleep(60)
|
|
while not self._stop.is_set():
|
|
try:
|
|
await asyncio.to_thread(self.verify)
|
|
except Exception as exc:
|
|
self.store.log_event("verify", "error", repr(exc))
|
|
await asyncio.sleep(300)
|
|
|
|
async def _loop_maintenance(self):
|
|
while not self._stop.is_set():
|
|
await asyncio.sleep(3600)
|
|
now = time.time()
|
|
if now - self.last_compact >= self.cfg.storage.vacuum_period_s:
|
|
try:
|
|
removed = await asyncio.to_thread(
|
|
self.store.compact,
|
|
self.cfg.storage.raw_retention_days,
|
|
self.cfg.storage.five_min_retention_days,
|
|
)
|
|
self.last_compact = now
|
|
self.store.log_event("compact", "info", json.dumps(removed))
|
|
except Exception as exc:
|
|
self.store.log_event("compact", "error", repr(exc))
|
|
self.save_state()
|
|
|
|
def start(self) -> None:
|
|
self._stop.clear()
|
|
self._tasks = [
|
|
asyncio.create_task(self._loop_sample()),
|
|
asyncio.create_task(self._loop_train()),
|
|
asyncio.create_task(self._loop_verify()),
|
|
asyncio.create_task(self._loop_maintenance()),
|
|
]
|
|
|
|
async def stop(self) -> None:
|
|
self._stop.set()
|
|
for t in self._tasks:
|
|
t.cancel()
|
|
for t in self._tasks:
|
|
try:
|
|
await t
|
|
except (asyncio.CancelledError, Exception):
|
|
pass
|
|
try:
|
|
self.save_state()
|
|
except Exception:
|
|
pass
|
|
|
|
# ------------------------------------------------------------ views
|
|
|
|
def status(self) -> Dict:
|
|
return {
|
|
"site": self.cfg.site.name,
|
|
"hardware": "sense-hat-v2" if self.board.available else "simulator",
|
|
"colour_sensor": self.board.has_colour,
|
|
"rows": self.store.row_count(),
|
|
"history_days": round(self.store.span_days(), 3),
|
|
"last_train": self.last_train,
|
|
"next_train_in_s": max(0.0, self.cfg.model.train_period_s
|
|
- (time.time() - self.last_train)),
|
|
"climatology_ready": self.climatology.ready,
|
|
"annual_terms": self.climatology.use_annual,
|
|
"compensator_k": round(self.tracker.compensator.k, 4),
|
|
"calibrations": self.tracker.compensator.n_calibrations,
|
|
"health": self.monitor.health.overall,
|
|
"drift_stress": round(self.monitor.drift.stress, 3),
|
|
"retrain_requested": self.monitor.retrain_requested,
|
|
"training_log": self.training_log[:5],
|
|
}
|
|
|
|
|
|
def _fmt_horizon(seconds: int) -> str:
|
|
if seconds < 3600:
|
|
return f"{seconds // 60}m"
|
|
if seconds < 86400:
|
|
return f"{seconds // 3600}h"
|
|
return f"{seconds // 86400}d"
|