The board carries two independent thermometers and the code averaged them
into temp_raw without ever recording either. Measured over 12 samples on a
real station: HTS221 30.973 C at sd 0.060, LPS25HB 29.810 C at sd 0.443, a
standing gradient of 1.163 C with the SoC at 44.55 C.
Two things follow from that and neither is possible without the raw channels.
A plain average of a quiet sensor and one seven times noisier lands at sd
0.223 where inverse-variance weighting reaches 0.060, and the gradient between
two chips at different distances from the SoC is a second observation of
self-heating that could identify the compensator's k with no reference
thermometer. Both need history, and history cannot be backfilled, so the
columns land on their own ahead of the work that consumes them.
CREATE TABLE IF NOT EXISTS is a no-op against a table that already exists, so
adding to COLUMNS would have reached a fresh install and silently missed every
station already running, then surfaced as an OperationalError inside
insert_telemetry. That sits on the sample loop, so it takes a station down
rather than leaving a gap. Store now reconciles the table against COLUMNS on
open, which makes every future column addition safe rather than just this one.
The simulator gains the same two channels, with couplings solved so their
forward models average to exactly the k = 0.55 the compensator is tuned
against. Aggregate behaviour is unchanged; only the per-channel detail is new.
Simulated temp_raw noise does rise from 0.05 to 0.223, which is not a
regression but the end of an over-optimistic figure: it was modelling the
quiet sensor and calling it the average.
1. POST /api/recompute re-derives every compensated column from the untouched
raw values, removing the step a calibration otherwise leaves through the
history. Possible because temp_raw, cpu_temp and hum are never overwritten.
Idempotent by construction and tested per row: 0 of 6051 rows change on a
second run. 6069 rows in 0.25 s here, so a few seconds on the Pi.
2. Calibration now emits a 'discontinuity' event alongside the calibration log,
so downstream views can find the boundary without parsing prose.
3. Vendored Tailwind, Chart.js, hammer, the zoom plugin, KaTeX with its 20
woff2 faces, and both Google fonts into ashvale/static, served by the
station. 1.4 MB. Verified with every non-localhost request aborted in the
browser: zero external requests, equations still render, fonts still load.
The dashboard no longer needs internet.
4. 54 pytest cases over the pure numerics: physics closed forms and round
trips, both compensator inverse properties, the Kalman covariance
invariants and NIS consistency, the RLS trace cap under a deliberately
unexcited regressor, conformal coverage, and the Zambretti ordering. Wired
into CI after the seed step so the recompute cases have history. Writing
them caught my own sign error on the conformal update: a hit raises alpha
and narrows the band, which reads backwards until you follow it through.
5. Stats for Nerds gains the condition number of each head's covariance, a
standardised innovation histogram per Kalman filter from a bounded 600
sample ring buffer, and a reliability strip of realised against nominal
coverage. All arithmetic on data already in memory.
6. OutdoorProbe reads a DS18B20 over the kernel 1-Wire driver, no new
dependency. Polled on its own slower cadence because the sensor blocks for
up to 750 ms during conversion, which would eat a third of the 2 s sample
budget. Rejects the 85000 power-on sentinel and out-of-range values, and
reports age so a dead probe cannot masquerade as fresh.
kemal