The generator added 0.05 hPa of measurement noise where a real board shows
0.0224 hPa as the sd of the change between 30 s samples. Twice the noise
flatters any smoother tested against it and understates the skill available
at short lead, which is where the pressure heads were already weakest.
Correcting my own earlier claim: I reported the simulator's pressure as 60x
too noisy. That figure came from comparing the old local database, whose rows
are hourly-tier aggregates spanning 251 days, against 30 s rows from the
station. Generated like for like at matched cadence the gap is 1.9x, not 60x,
and the simulator was never the blocker on pressure work that I described.
A gap remains after this change: press_slp still steps 0.0415 hPa per 30 s
against the station's 0.0224. That residue is the synoptic OU process moving
faster than Cambridge did over these four days, which is a weather-realism
question rather than a sensor one. Four days of one room is not enough to
retune a synoptic model against, so it is left alone and recorded here.
The board carries two independent thermometers and the code averaged them
into temp_raw without ever recording either. Measured over 12 samples on a
real station: HTS221 30.973 C at sd 0.060, LPS25HB 29.810 C at sd 0.443, a
standing gradient of 1.163 C with the SoC at 44.55 C.
Two things follow from that and neither is possible without the raw channels.
A plain average of a quiet sensor and one seven times noisier lands at sd
0.223 where inverse-variance weighting reaches 0.060, and the gradient between
two chips at different distances from the SoC is a second observation of
self-heating that could identify the compensator's k with no reference
thermometer. Both need history, and history cannot be backfilled, so the
columns land on their own ahead of the work that consumes them.
CREATE TABLE IF NOT EXISTS is a no-op against a table that already exists, so
adding to COLUMNS would have reached a fresh install and silently missed every
station already running, then surfaced as an OperationalError inside
insert_telemetry. That sits on the sample loop, so it takes a station down
rather than leaving a gap. Store now reconciles the table against COLUMNS on
open, which makes every future column addition safe rather than just this one.
The simulator gains the same two channels, with couplings solved so their
forward models average to exactly the k = 0.55 the compensator is tuned
against. Aggregate behaviour is unchanged; only the per-channel detail is new.
Simulated temp_raw noise does rise from 0.05 to 0.223, which is not a
regression but the end of an over-optimistic figure: it was modelling the
quiet sensor and calling it the average.
Seven day outlook moves from History to Live, which now runs four rows.
Conditions ahead tightened so the Live column no longer needs a scroller.
Adds HumidityCompensator: an additive RH offset estimated by one-step RLS from
a trusted hygrometer, clamped to +/-35%, persisted, exposed at
POST /api/calibrate/humidity and on the renamed Models and calibration tab.
It also implements the psychrometric term (RH moved from element temperature
onto air temperature via conserved vapour pressure) but leaves it OFF by
default. The thermal argument predicts a hot element reads low; measured
against a reference hygrometer this board read 75.4% where the truth was
50.4%, so it reads HIGH and that correction would push it the wrong way. When
the flag is enabled, simulate.py applies the exact inverse, per the
simulator/compensator trap in DESIGN.md section 2.
Models pane rebuilt: the scorecard is one column per target so all 18 heads
are visible, and no panel on the tab uses an internal scroller. Verified in
Chromium at 1600x900: Live, History and Models all report zero scrollbars,
zero clipping, no page scroll, zero console errors. Backtest is numerically
identical to the previous commit, confirming the humidity work is a no-op
while the flag is off.
kemal